From Vernacular Craft to Robotic Fabrication: Learning from Japan with UK RAS STEPS
Introduction: An international workshop on timber, craft and robotics
Thanks to support from the UK RAS STEPS Conferences and Training Fund, I travelled to Japan to participate in the AA Visiting School Vernacular Craft to Digital Fabrication. This 12-day workshop brought together three pioneering practices: VUILD (Japan), AA Hooke Park (UK) and Office Ten Architecture (UK) to explore the future of timber construction at the intersection of vernacular craftsmanship, robotic fabrication and circular material reuse.
Taking place across Tokyo, Kanagawa and the Noto Peninsula, the workshop investigated how traditional Japanese timber knowledge could inform robotic manufacturing, and how reclaimed timber from earthquake-damaged buildings could be repurposed through computational design and robotic fabrication. The programme combined site visits, practical craft training, digital design and fabrication, culminating in the construction of a timber structure in Noto.
The workshop had particular relevance to the recovery of the Noto Peninsula, where the earthquake of 1 January 2024 caused extensive damage to buildings and disrupted local communities and craft-based economies. Working with reclaimed timber from the region provided an opportunity to explore how digital technologies might support material recovery while contributing to the preservation and reinterpretation of traditional construction knowledge.
Understanding the timber supply chain
The programme began with a series of visits exploring different stages of the timber supply chain, from forestry and material processing to architectural design and construction.
Our first visit was to Tokyo Chainsaws, a sustainable forestry company based in Hinohara Village, in the mountainous western outskirts of Tokyo. The company works to revitalise local woodlands through a whole-tree, zero-waste approach, overseeing processes from planting and selective logging to milling and drying. By processing timber in-house and finding uses for different parts of the tree, including branches and roots, the company demonstrates how local forestry can support a more circular approach to material production.
We subsequently visited Meiji Shrine, where we observed traditional Japanese timber construction and a range of architectural styles characterised by intricate joinery and carefully resolved structural geometries. A lecture by Professor Seiichi Fukao on the history and theory of Japanese timber construction provided further context for understanding the relationship between material, craft and architectural form.
The programme continued with a visit to Yoyogi National Gymnasium, an internationally recognised example of post-war Japanese architecture, renowned for its expressive suspended-roof structure. We also visited the offices of Kengo Kuma and explored VUILD’s Pre-wood project, a building developed using a modular timber system designed for digital manufacturing, disassembly and reuse.
Together, these visits provided a broader understanding of timber as both a natural resource and a construction material, highlighting the connections between forestry, processing, architectural design, craftsmanship and circular construction.
From traditional craftsmanship to digital fabrication
The next stage took place at VUILD’s workshop in Atsugi, Kanagawa. Here, we explored how the principles of traditional Japanese woodworking could be translated into contemporary computational and robotic workflows.
A master temple carpenter introduced us to traditional woodworking techniques, including sawing, chiselling, planing, and the preparation and treatment of timber. This hands-on experience highlighted the precision, practical judgement and accumulated knowledge involved in vernacular construction. Rather than simply reproducing traditional techniques digitally, the workshop challenged us to identify their underlying principles and reinterpret them through contemporary manufacturing technologies.
This approach was particularly relevant to the use of reclaimed materials. Unlike standardised timber stock, salvaged structural elements have individual geometries, dimensions and conditions. Designing with such materials is therefore an availability-based problem: each piece must be assessed individually, and the overall design developed around the material that is actually available.
The timber used in our project had been salvaged from earthquake-damaged buildings by Noto Fukko Labo, a local recovery organisation working to recover structural timber from traditional kominkan, the historic houses that characterise the region’s built heritage, and prepare it for future reuse.
Designing with reclaimed timber
The design process began with the three-dimensional scanning of the reclaimed timber. The resulting geometries were modelled in Rhino and Grasshopper, allowing us to develop a target structure around the dimensions and characteristics of the available material.
The design comprised three reciprocal tripods, each formed from three timber elements and functioning as a supporting pillar, together with an additional reciprocal arrangement of three elements forming the beams. Once the overall configuration had been established, we developed the joints using geometries inspired by traditional Japanese timber joinery.
Translating these connections into a digital fabrication process required us to consider several constraints simultaneously: the irregularity of the reclaimed timber, the geometry and structural performance of the joints, the reach and movement of the robot, and the cutting capabilities of the chainsaw. Structural analysis was used to assess the stability of the proposed configuration and inform the design.
The fabrication process combined computational modelling, structural assessment and robotic machining. We used a KUKA robotic arm equipped with a chainsaw to machine the reclaimed timber elements. The roof was constructed from triangulated 4 × 4-inch timber sections, fabricated using a combination of three-axis and five-axis CNC machining.
Working through these stages demonstrated how computational design can connect material scanning, geometric reasoning, structural analysis and robotic fabrication within a single workflow. It also revealed the practical challenges of translating traditional joinery principles into machine-executable operations while accommodating the physical limitations of both the material and the equipment.
Building for Noto’s recovery
Following the fabrication phase, we travelled to the Noto Peninsula to install the completed structure at the Noto Fukko Labo volunteer base in Wajima.
The structure was designed as a shelter for a boiler at the volunteer centre, which supports the wider effort to catalogue, store and redistribute timber salvaged from earthquake-affected buildings for future reuse. The project therefore had a practical purpose beyond the workshop itself: it demonstrated how recovered material could be transformed into a useful structure while remaining connected to the place and community from which it originated.
Completing a built project using reclaimed timber, computational design and robotic fabrication was particularly valuable to me. As a robotics technical professional working at UCL, I was able to bring aspects of my own research into robotic manufacturing into a collaborative, real-world setting. The project also demonstrated that digital fabrication can accommodate non-standard materials rather than relying exclusively on standardised stock.
Reflections: Connecting craft, robotics and circular construction
The workshop provided a much broader understanding of the timber economy, from forestry and sawmilling to architectural construction, material recovery and reuse. It demonstrated how robotics can support more than the automation of conventional building processes: it can also enable new ways of working with irregular materials, adapting designs to available resources and reinterpreting traditional construction knowledge.
The experience was equally valuable as an opportunity to exchange knowledge with researchers, architects, engineers and craftspeople from Japan and the UK. It strengthened professional relationships and opened up opportunities for future collaboration and knowledge exchange between the two countries.
Most importantly, the support provided by the UK RAS STEPS Conferences and Training Fund made this intensive international training experience possible. The knowledge and practical skills gained will inform my ongoing research, teaching and technical practice at UCL, while providing lessons that can be shared with the wider UK robotics community.
The experience reinforced my belief that the future of robotic construction does not necessarily lie in replacing traditional knowledge, but in developing new ways to connect it with digital technologies. Combining the accumulated knowledge and adaptability of craft with the precision and capabilities of robotics offers promising approaches to more circular, resource-conscious and sustainable construction.